Our Sided Changing Room Bench with Hooks is a great all-in-one solution where you are kitting-out your changing room, locker room, cloakroom etc.
Manufactured by us at our factory in Manchester, our Changing Room Benches with Coat Hooks are supplied with our virtually unbreakable coat hooks. The coat hooks are pre-fixed to the hook board, so you don’t need to spend time adding each individual hook.
As all the parts which make up our Single Sided Benches with Hooks are already pre-drilled, it would take 2 people approximately 15 minutes to assemble. Cloakroom Benches and Locker Room Benches with hooks are supplied flat pack with easy to follow assembly instructions and fixings.
Available from stock in choice of lengths for fast delivery with a grey frame and grey hooks. We also offer optional extras such as floor fixing brackets to secure the Benches to the floor and adjustable feet to accommodate sloping & uneven floors. Adjustable feet and floor fixing brackets are supplied as a set.
Our Single Sided Changing Room Bench with Hooks are manufactured from 40mm x 40mm mild steel tube and powder coated Ral 9006 to give the bench frames additional rust protection as standard making our Changing Room Benches suitable for damp environments.
Each of our benches are supplied with Ash timber slats which have 4 radiused corners. Each slat is sanded, sealed and polished with 2 coats of clear lacquer. 300mm deep benches are supplied with 3 seat slats.
We also manufacture a range of Changing Room Benches with Hooks and a Shoe Shelf for off the floor storage.
Direct from us; a trusted UK manufacturer and supplied with our 5 year manufacturer’s guarantee. Not only are you getting great value, you are also getting fantastic quality
Features & Benefits of our Changing Room Bench with Hooks
- Our Changing Room Bench with Hooks are manufactured by us at our factory just outside Manchester
- Strong & Robust
- Available in a choice of lengths
- Available from stock
- Complete with our virtually unbreakable coat hooks
- Pre fitted coat hooks saving you time on the installation
- Fast Delivery
- Supplied flat pack with easy to follow assembly instructions
- Pre-drilled parts for quick assembly
- Adjustable Feet & Fixing Brackets accommodate sloping & uneven floors and allows the bench to be fixed in place
- Can be easily handled
- Direct from us; a trusted UK manufacturer
- Supplied with our 5-year manufacturer’s guarantee
Bulk Ordering and Contractor Discounts Available – email us your requirements for a quotation
Changing Room Bench with Hooks Specification
Unit Height: 1727mm Overall
Seat Height: 450mm
Seat Depth: 300mm (400mm overall when built)
- 2000mm (2000mm benches are supplied with a middle leg)
Number of Coat Hooks:
- 1000mm = 5 hooks
- 1200mm = 6 hooks
- 1500mm = 8 hooks
- 2000mm = 11 hooks
Changing Room Bench with Hooks Material Specification
Frame & Legs: 40mm x 40mm ERW mild steel tube
Finish: Powder coated Ral 9006 as standard to provide additional rust protection in damp environments (for chlorinated areas, please contact the sales department 0161 620 7250)
Wooden Seat Slats / Hook Boards / Back Rest: 80mm x 25mm ash timber. Sanded, sealed and polished with 2 coates of clear lacquer
Feet: Threaded end caps to enable the bench to be moved without scratching the floor
Fixing Brackets & Adjustable Feet: Enables you to fix the bench to the floor to accommodate sloping or uneven floors
The approximate lead time for our Changing Room Benches with Hooks is approximately 2-3 working days (excluding Bank Holidays). As stocking levels change on a daily basis, we will advise you of any delays or if there is an alternative product available.
Many of our products are entitled to Free Standard Mainland UK Delivery and without any restrictions.
This excludes the following Postcode Areas:- IV, AB, KW, HS, ZE, PA, PH, DD, IM, GY, JE, TR, BT, Isle of White, Isle of Anglesey and Eire. These Postcode areas will be subject to an additional charge, please contact us for a quotation before placing your order. If you have placed your order, we will advise you of the delivery cost and send you a Pro Forma Invoice.
Standard Delivery is Monday to Friday between 8am to 6pm and to ground floor / kerbside only unless agreed with AMP Wire Ltd in writing. If there are any delivery restrictions / specific dates / times / dedicated deliveries / above ground floor deliveries, or FORS Registered deliveries, please contact the sales department as there may be an additional cost.
We will deliver using the most economical method, either using our own vehicles or a carrier. Goods may be palletised and delivered on an articulate vehicle. The deliveries are kerb side only so you would need to arrange to unload the vehicle.
This item can be returned and will be subject to a 15% restocking fee.
Goods must be returned in the same condition in which you received them with all original packaging and at your own cost and risk. Once we have received the goods, if we can re-sell, we will refund the cost of the goods only less a 15% restock fee.
Please check the delivery before signed as AMP Wire Ltd will not accept claims for damaged goods if the goods have been signed for. If an item is damaged upon receipt of delivery, please write “Damaged” on the carrier notes and call or email us within 24 hours (if you can add pictures to your email that would be helpful). Our Carriers will NOT accept claims if you sign for the goods or write “unchecked” etc, so please check before signing.
Please see our Delivery and Returns Policy for more information
Only logged in customers who have purchased this product may write a review.
Being “Bespoke”, “Custom Made” or “Made to Order” doesn’t mean expensive. From customised dimensions to different materials and finishes, we can help. Simply email us or call our friendly team on 0161 620 7250 to discuss your requirements. View our Gallery to see examples of custom-made products we have manufactured.