| Dimensions | N/A |
|---|
Changing Room Benches with a Shoe Shelf for off the floor storage. Robust steel frames with solid ash wooden slats. Available in a wide range of sizes.
Available from stock in all lengths
Changing Room Benches with a Shoe Tray are suitable for use in Changing Rooms, Locker Rooms, Cloakrooms, Hospitality and Leisure Centres, Schools, Colleges and Portacabins.
Available from stock in choice of lengths and depths for quick delivery. Our Changing Room Benches with a Shoe Shelf are supplied flat pack with easy to follow assembly instructions and takes approximately 15 minutes to build. The Shoe Shelf provides off the floor storage for bags and shoes etc, to keep your floor space free of clutter and eliminate trip hazards in busy changing areas.
Our Changing Room Benches with Shoe Trays are made by us right here in the UK. The bench seat is made of solid Ash wooden slats which have been sanded and sealed with 2 layers of clear lacquer. Bench frames are manufactured from 40 x 40mm ERW box section with welded joints for strength and Shoe Trays from 25mm square mesh welded to a 25mm square frame. Both are then finished in a hard wearing silver/grey (ral 9006) powder coat.
Supplied free-standing as standard, our Benches can also be fixed into place by using the floor-fixing kits (purchased separately). Adjustable feet and floor fixing brackets are supplied as a set. The adjustable feet accommodate sloping & uneven floors.
Available from stock and supplied with our 5-year manufacturer’s guarantee.
We also manufacture a range of Changing Room Benches without Shoe Trays.
Need Something a Little Different?
Here at AMP Wire, we know that not every project and changing room area is the same. Simply email us your layout and requirements and we will work out the most cost effective solution for your changing room
Bench Height: 450mm Overall
Bench Depth:
Bench Length:
Legs: 40 x 40mm ERW mild steel tube
Shoe Shelf: 25 x 25mm ERW mild steel tube & 25.4 x 25.4 x 2.5mm mild steel wire mesh
Finish: Powder coated Ral 9006 to provide additional rust protection in damp environments (for chlorinated areas, please contact the sales department 0161 620 7250)
Wooden Seat Slats: 80 x 25mm ash timber. Sanded, sealed and polished with 2 coates of clear lacquer
Feet: Threaded end caps to enable the bench to be moved without scratching the floor
Optional Extras
Fixing Brackets & Adjustable Feet: Enables you to fix the bench to the floor to accommodate sloping or uneven floors
Delivery Information
The approximate lead time for our 300mm and 400mm deep Changing Room Benches is approximately 2-3 working days (excluding Bank Holidays). As stocking levels change on a daily basis, we will advise you of any delays or if there is an alternative product available.
Many of our products are entitled to Free Standard Mainland UK Delivery and without any restrictions.
This excludes the following Postcode Areas:- IV, AB, KW, HS, ZE, PA, PH, DD, IM, GY, JE, TR, BT, Isle of Wight, Isle of Anglesey and Eire. These Postcode areas will be subject to an additional charge, please contact us for a quotation before placing your order. If you have placed your order, we will advise you of the delivery cost and send you a Pro Forma Invoice.
Standard Delivery is Monday to Friday between 8am to 6pm and to ground floor / kerbside only unless agreed with AMP Wire Ltd in writing. If there are any delivery restrictions / specific dates / times / dedicated deliveries / above ground floor deliveries, or FORS Registered deliveries, please contact the sales department as there may be an additional cost.
We will deliver using the most economical method, either using our own vehicles or a carrier. Goods may be palletised and delivered on an articulate vehicle. The deliveries are kerb side only so you would need to arrange to unload the vehicle.
Returns Information
This item can be returned and will be subject to a 15% restocking fee.
Goods must be returned in the same condition in which you received them with all original packaging and at your own cost and risk. Once we have received the goods, if we can re-sell, we will refund the cost of the goods only less a 15% restock fee.
Please check the delivery before signed as AMP Wire Ltd will not accept claims for damaged goods if the goods have been signed for. If an item is damaged upon receipt of delivery, please write “Damaged” on the carrier notes and call or email us within 24 hours (if you can add pictures to your email that would be helpful). Our Carriers will NOT accept claims if you sign for the goods or write “unchecked” etc, so please check before signing.
Please see our Delivery and Returns Policy for more information
As we are the UK manufacturer, we can make products to suit your needs.
From Customised dimensions to different materials and finishes…we can help!
Call us now for a free quotation
To see a few examples of Changing Room Benches and other products we have manufactured to suit our client’s requirements
Looking for a trusted UK manufacturer and supplier, look no further!
Bulk discounts are available whether you’re considering a large scale, returning project or a one off run.
